MTK100SM Surface Mount Type Mechanical Tyre Killers

General Description
MTK100SM Mechanical Tyre-Killer is one of the high security vehicle access control systems. The Tyre-Killer provides high security for sensitive areas (banks, military bases, airports, embassies etc) against forced and unauthorized entry or exit of motor vehicles. Mechanical tyre killer's each tooth works individually and lowers to the ground as the vehicle passes over with the vehicle's weight. After the vehicle's tyres pass over, the teeth raise up to its default position automatically. If an attempt to pass through the tyre killer from the opposite side is made, tyres of the unauthorized vehicle will definitely be destroyed immediately, therefore the vehicle moves only a few more meters and is inactivated. With the help of a mechanism, namely Latch Down Mechanism (optional), attached to the mechanical tyre killer, the teeth of the tyre killer is locked all together at lowered position when desired. The hardened teeth stand 12cm above the ground level normally. Theet are attached to the same 16mm diameter hardened steel rod. Each tooth works individually. Mechanical lowering mechanism (Latch Down Mechanism) is placed to one end of the Tyre Killer and it stands below the ground level. It is a complete assembly with the body. Consequently, both manual drive of motion for all of the teeth and minimum effect of external factors to the mechanism are achieved. MTK100SM can be manufactured in different designs according to client’s demand.
TUV CE Certificates